GLBIMR, MAT Cutoff 2023 for General Category is listed below. The overall cutoff percentile for MAT is 60.
It is important to think before applying to institutes like these as it has been evident by many students like colleges such as GL Bajaj in Greater Noida promises about various facilities, infrastructure and placements which they ultimately fail to provide. It has also been seen that Tier1 colleges fail to get all of their students placed in campus placement drives.
You can take another year for the preparation if they wish in order to get better colleges. and give another trial at CAT.
On the other hand, if you still want to choose between the two and do not want to prepare for another year, then you can go for IBMR in Gurgaon due to the following reasons:
Categories |
IBMR Gurgaon |
Highest CTC offered |
INR 18.5 LPA |
Average CTC offered |
INR 8 LPA |
Recruiting Companies |
Microsoft, IBM, ITC, Wipro, etc. |
In a city like Gurgaon, you will be able to find off campus placement if you don’t like or don’t receive the on campus placements; there are other scopes too.
Having friends at both the institutions, I can say that these are ‘decent ‘colleges. Selecting a stream is more important. I believe you should do some research on your own to obtain the exact picture of now. You can have a better option, of taking admission in Tier I colleges or obtaining a higher CAT score, if possible attempt MAT, with a target of above 95.
In between these institutes, it is suggested that you choose the Jaipuria Institute of Management.
Categories |
Jaipuria Ghaziabad |
GL Bajaj |
Course Fee |
7.5 lakh |
1.19 lakh |
Highest CTC |
10-20 LPA |
16 LPA |
Average CTC |
5-6 LPA |
3.5 LPA |
Recruiting Companies |
JP Morgan, TCS, Capgemini, IBM, etc. |
Google, Byju’s, Jaro Education, Citi, etc. |
There are certain things you need to consider before applying like your stream of choice, do a thorough alumni check, the salary package offered, etc.
A few of my friends graduated from Sharda University and G. L. Bajaj. Here is some information about these universities that might help you know about them a bit better. Both the colleges are good but there are some pros and cons.
Particulars | Sharda University | G. L. Bajaj |
Total fees | 6.85 Lakhs – 7.71 Lakhs | 4.36 Lakhs – 10.45 Lakhs |
Placement percent | 50% | 95% |
Highest CTC | INR 18 LPA | INR 31 LPA |
Average CTC | INR 4 LPA | INR 3.5 LPA |
It is suggested that you go for Sharda University as it is much better than G. L. Bajaj. However, ultimately it is your decision. .
Having talked to multiple students studying in these colleges and based on the interaction I had with them here are some of the insights that might be useful to you:
Particulars |
GL Bajaj of Management and Research (Greater Noida) |
PIBM (Pune) |
Birla Global University (Bhubaneswar) |
Placement Rate |
85% |
99% |
97% |
Highest Package Offered |
32 LPA |
17 LPA |
10.2 LPA |
Average Package Offered |
4.8 LPA |
6.5 LPA |
7.8 LPA |
Top Recruiters |
ICICI Bank, Axis bank, HDFC bank, TCI, Paytm, BATA, OYO, etc |
Deloitte, Futurism, Elf, XL Dynamics, IFFCO TOKIO, Hettich, S&P Global, etc. |
TVS, Infosys, Kotak, ITC, HDFC, SBI, Extramarks, etc. |
You need to introspect and work hard for the MBA entrances this year and aim to get into the top or at least good mid rung institutes. That being said, if you have to take admission this year, no matter what, I would suggest going for GL Bajaj of Management and Research.
NIET is an A Grade college that receives more than 100 companies each year including Tata Consultancy Services; Vivo Smartphones; Voltas Limited and Nestle.
In 2019, 7 students were recruited by Centylitics at an average payment of INR 5.5 LPA at ABES Engineering College; and more than 245 students were recruited by 10 companies including BYJU's and Traveloka.
At GL Bajaj College more than 200 students got placed with core companies; 3 of its students were recruited by Amazon at the highest package of INR 30.25 LPA.
Here's a table highlighting some essential differences:
Parameters |
NIET |
ABES Engineering College |
GL Bajaj College |
Placement percentage |
60 |
85 |
90 |
Campus size |
14 acres |
15.2 acres |
11.5 acres |
Fee |
INR 82,000-1.15 LPA |
INR 1.38 LPA |
INR 1.5 LPA |
Average Package |
INR 4.5 LPA |
INR 5.5 LPA |
INR 3.5 LPA |
Admission Process
Admissions require students to have 45% and 60% marks in 10+2 and graduation respectively with UPSEE, CAT, or GATE scores.
Infrastructure
Special Programs
Placements
NIET:
ABES Engineering College:
GL Bajaj College:
NIET has 280 Faculty Members, most of them with a postgraduate degree in MTech. ABES Engineering College has 48 faculty members and GL Bajaj College has over 250 academicians and researchers as its faculty members. Students may decide on factors listed above as per their preferences.
G.I Bajaj Institute of Technology and Management, Greater Noida is ranked 57 for BTech by India Today 2020. It is affiliated to Dr. APJ Abdul Kalam Technical University and has been approved by AICTE.
ABES Engineering College, Ghaziabad is affiliated to AKTU Lucknow and approved by AICTE, UGC and NAAC. They have a student strength of over 5000 students. It has a 20 years legacy in educational excellence.
AKGEC Ghaziabad is ranked 251 for BTech by NIRF 2020. It is affiliated to Dr. A.P.J. Abdul Kalam Technical University and approved by AICTE.
NIET Noida is ranked 129 for BTech by The Week 2020. It is affiliated to AKTU and recognized by AICTE. It has been accredited Grade A by NAAC. They have over 3750 seats.
PSIT Kanpur is ranked 37 for BTech by TOI 2020. It is affiliated to AKTU and CSJM University, Kanpur. It is approved by AICTE, BCI, PCI and UGC.
Admission Details
Placements
Categories |
G.L. Bajaj |
ABES Ghaziabad |
AKGEC Ghaziabad |
NIET Noida |
PSIT Kanpur |
Placement Percentage |
80-90% |
89% |
81% |
50% |
90% |
Highest CTC |
30.25 LPA |
8.6 LPA |
10 LPA |
9 LPA |
26 LPA |
Average CTC |
4.49 LPA |
5 LPA |
2.80 LPA |
3.82 LPA |
3.5 LPA |
G.L. Bajaj
ABES Ghaziabad
AKGEC Ghaziabad
NIET Noida
PSIT Kanpur
Among all the colleges PSIT Kanpur has the best placement record. If location is not your biggest concern then you can also opt for G.L. Bajaj. CSE is the most sorted out engineering course. They have a great demand in the corporate world and also in the IT sectors. CSE deals with computer programming and networking, circuit designing and writing software that powers them, program design and programming languages. The BTech and MTech courses are of 4 years and 2 years respectively.
PSIT Kanpur, GL Bajaj Noida, and NIET Noida are one of the top Engineering colleges in India. The institutes provide courses in technology, law, and management, however, they are more known for their engineering courses. All these colleges conduct admissions through scores availed at various centralized entrance exams like JEE Main while PSIT is located in Kanpur, GL Bajaj and NIET are in different parts of Noida City.
Ranking:
Affiliation:
Cut-offs:
Placements:
All the above-mentioned colleges are very well known for their placements locally.
The table given below gives a brief overview of all the institutes:
College |
Ranking |
Cut-offs |
Fees |
Placements |
PSIT Kanpur |
39th among the top engineering colleges |
24534-38595 |
?1.7 Lakhs (1st Year) |
1480 total placements |
GL Bajaj Noida |
26th in Top private Colleges |
11265-15211 |
?1.4 Lakhs (1st Year) |
85% |
NIET Noida |
1st in Noida |
23987-34341 |
?1.4 Lakhs (1st Year) |
50% |
All these three colleges are up to their mark in their various fields. Although a student should see the placement records and further opportunities, ultimately it depends on the interest and ranking of the student.
The choice of UPTU college for a B.Tech CS/IT course depends entirely on your priorities and preferences. Consider factors such as your preferred location, cost of living, city culture, security, placement opportunities, and most importantly, the quality of education offered by the college.
While the quality of education may be a factor to consider, remember that ultimately, your success in college will depend on your own dedication and effort. The atmosphere and culture of a college can have an impact, but it is not the only determining factor in making a college the "best" choice for you.
Based on these considerations, we recommend that you consider IMS Engineering College as your first choice, followed by NIET, and lastly G.L Bajaj.
XLRI offers a 15 month, full-time residential program. It is one of XLRI'S flagship programs accredited by the AMBA. It includes a 3 months field training as well. Each batch has only 101 students selected on merit.
SP Jain's PGDM program is a 2-year program accredited by AMBA and NBA as well. This program allows flexibility in changing the major as well.
Here's an overview of the three institutes:
Parameters |
GL (PGPM) |
XLRI (PGDM) |
SP Jain PGDM |
Placement rate |
100% |
100% |
100% |
Campus size |
27 acres |
50 acres |
45 acres |
Total Seats |
240 |
360 |
240 |
Fee |
11-15 LPA |
23 LPA |
17.50 LPA |
Average Package |
13.6 LPA |
24.3 LPA |
22 LPA |
Special Facts on Infrastructure and Program
SP Jain
GL Bajaj
XLRI
Placement Data 2020
XLRI
GL PGPM
SP Jain
Students can decide on a program based on the convenience of location and placements provided.
All these institutes offer decent Mechanical Engineering programs. JUET has been ranked 86 among the top 100 universities in India by NIRF. Whereas G.L. Bajaj Noida and Medicaps Indore are ranked 26 and 118 for B.Tech by India Today.
JUET Guna:
Admission-
For BTech admission, 60 seats are filled through JEE and another 60 is on a merit basis (10+2 results).
The tuition fee per semester for B.Tech is Rs.82500 and Rs.42000 for M.Tech.
There are a total of 120 seats for B.Tech and 10 seats for the M.Tech course.
Facilities-
There are Computer-Aided Design Lab, Computer Integrated Manufacturing Lab, Mechatronics Lab, Fluid Mechanics and Machinery Lab, and many other lab facilities to ensure the practical skills of the students.
The laboratories are well equipped with advanced manufacturing technologies such as CNC machines, Robots, Additive manufacturing machines, and software packages such as Autocad, Pro/Engineer ABAQUS, Magics RP, Edge CAM, etc.
Placements-
Nearly 110 students of the 2016-2020 B.Tech Mechanical Engineering batch got placed after graduation.
Major recruiters are Adani Wilmar, Mahindra & Mahindra Ltd., JSW Steels Ltd., Bosch Ltd., John Deere, Liu Gong, DHL, Sanghi Cements, Vihaan Networks Ltd., and Lutron and many more.
G L Bajaj:
Admission-
The admission to the B.Tech program is through JEE Mains.
The total course fee is 2.2 lakhs
Facilities-
The department has a Thermodynamics and Applied Thermodynamics lab, Fluid Mechanic lab, Dynamics of Machines lab, CAD/CAM lab, and Material Science lab, and many other facilities.
It has centers like the Design Innovation Centre, Centre for Aerodynamics, Centre for HVAC-R, and Centre for Robotics & Automation and SAP Learning Hub.
Placements- The department equips students as industry-oriented engineers.
Fortune industries such as Graziano, Saint Gobin, DCM Shriram, Systemair, Elgi, Tech Mahindra, and Infosys are the main recruiters.
The average CTC offered is 4.4 LPA.
Medicaps:
Admission-
The admission to the B.Tech and M.Tech Mechanical Engineering program is through JEEMains and GATE examination.
The course fees for B.Tech and M.Tech are 4 lakhs and 1 lakh.
Available seats for B.Tech are 180 and 18 for M.Tech.
Facilities- The Mechanical Engineering department of the Medicaps has more than 52 highly experienced faculty members and 13 fully-fledged laboratories with modern machinery and software.
Placements-
Some popular recruiters include TCS, Wipro, Zetatek, Umang Engg, Amazon, Force, Wintek Tapadia, Skill Ventory, Locus, and many others.
The average CTC at the institute is 3.88 LPA.
Hence, it is better to choose either JUET or Medicaps. Both offer B.Tech and M.Tech degrees in Mechanical Engineering, along with advanced curriculum and well-equipped laboratory facilities to make the students apt for the emerging market demands.
Comments