Get Answers on Test Preparation, Admissions & Campus Life
Study Abroad Countries
How was your test and interview experience for an M.Tech at IIT Gandhinagar?
I completed my B.Tech ECE. Due to Covid-19, I got a direct interview call from IIT Gandhinagar for M.Tech ECE. I got interviewed on Google Meet.
Out of the four choices given to me, I opted for microelectronics and VLSI as my first preference. 20 minutes prior to the interview, I received a call from the technical supervisor asking me to be prepared. There were 3 panelists for my interview and all of them belonged to the Electrical Engineering Department of IIT Gandhinagar.
The interview started with a basic introduction and I was asked for my favorite subjects. After this, I was asked questions to assess my knowledge of the field. I am listing down the questions which the panel asked me-
- What is the propagation delay in logic ckt, why does delay occur?
- Explain NOR and NAND gate.
- Explain BW of an amplifier.
- Explain BW of the single pole system.
- What are the conditions for which the gain BW product is constant?
- Differentiate ideal and real op amp.
- Draw a T C curve of both.
- O/p for open loop op amp.
- What is CMRR, and what is common mode gain?
- What is the BW of (real) op amps?
- Does Amplification violate energy conservation law?
The IIT Gandhinagar staff is quite helpful and supportive. I received 3 calls every 15 minutes to alert me before the interview. My interview went well and I got selected for the M.Tech program.
Is electronics and design technology for NIT Calicut worthy? How are the core placements for this branch?
To decide a course’s worth depends not only on the subjects dealt with but also on the aptitude/expectations of the student.
It would be good to keep in mind that power electronics is quite a vast field. Electronics Design and Technology is like any other specialization offered by NITC.
If you go in-depth you get to know that this course is a blend of VLSI and embedded/system design.If you are interested in the VLSI domain, then EDT is definitely your way. Most of the subjects are shared with Microelectronics & VLSI branches.
|
Categories |
NIT Calicut |
|
Course Fee |
5.42 lakh |
|
Placement Percentage |
75-78% |
|
Highest CTC |
11.37 LPA |
|
Average CTC |
4.08 LPA |
|
Recruiting Companies |
TI, Broadcom, Nvidia, Synopsys, etc. |
Okay, let us take a look at the placement scenario:
- Placements are a bit off for M.Tech students relative to B.Tech students at NITC.
- Several core VLSI companies (TI, Broadcom, Nvidia, Synopsys, etc) end up hiring mostly B.Tech batch.
- It also depends on your academics too.
- Intel usually hires interns during the second year.
- These internship opportunities are available only to VLSI and EDT students mainly.
Though, the chance for placement in core companies directly is relatively less. But, if you manage to maintain your CGPA on or above 8 you have a chance to get into a good internship opportunity. There will be internship opportunities available in companies like Broadcom, Intel, and Cypress.
Most of these guys selected will be converted to full-time after one year of internship. You can do an internship and Second-year M.Tech main project at the same time. If you are really good you can also try for an internship from other branches like Telecom and Signal Processing.
How are the placements of IEOR at IIT Bombay?
Campus Placement of IEOR at IIT Bombay is carried out in two phases. For the last two years, IIT Bombay has managed to earn its credibility by maintaining a 100% mark for MTech students. With the increase in the demand for IEOR, the number of students willing to pursue this program is increasing every year. This year the total seats for IEOR were 32.
Given the current scenario, IEOR is no longer restricted to OR Analysts. The job prospects of this program have broadened with some major roles like
- Machine Learning Engineer
- AI Engineer
- Data Scientist
- Data Engineer
- Software Engineer
- Financial Engineer
- Actuarial Scientist
- Consultant
- Business Analyst
- Supply Chain Analyst
- Modeling Analyst
The key highlights of IEOR placements at IIT Bombay have been tabulated below
|
Particulars |
Statistics |
|
Placement percentage |
78.95% |
|
Median CTC |
INR 13 LPA |
|
Average CTC |
INR 17.9 LPA |
|
Total International Offers |
58 |
|
Top Recruiters |
ACCENTURE, Analog Device, Apple, CITI Bank, Google, Hindustan Unilever, HONEYWELL, IBM, ISRO |
One can easily conclude that the placements of IEOR at IIT Bombay are just average. They provide you with the necessary opportunities only. It’s you who has to pave the way to success.
Can you share your M.Tech interview experience at IIT, Bhubaneswar?
My friend completed her MTech in ECE recently from IIT BHU and shared her interview experience. She along with other candidates was made to give a written examination based on which they got shortlisted for the interview. The interview was conducted by a strong panel of 4 faculties. Soon she was summoned for an interview.
The questions the panelists asked her were
- Give us your introduction
- The college from where she completed her Bachelor's
- Her favorite subject (Communication)
- Several questions related to PCM
- A few Questions on Quantization
- Question on A2D conversion and D2A
- The reason she chose IIT Bhubaneshwar for MTech
They asked her a few more general questions and concluded the interview which lasted for 15-20 mins. She realized that having proficiency in her favorite subject helped her. She advised her juniors to always go through the institution's official website and faculties before the interview. In case you recognize any of the faculties at the interview, you can impress them with the knowledge of their project you have. Overall, the interviewers asked more technical than personal questions.
How is the placement of M.Tech material science engineering at IIT Bombay?
Placements for IIT Bombay MTech Material Science Engineering are decent and a plethora of opportunities are offered to M.Tech students after MTech in Material Science
- This year, 56.52% of the total batch got placed
- The average package stood at INR 17.9 LPA
- The median package stood at INR 13 LPA
- 58 International offers were made
- Some students don’t opt for placement and go for higher studies. Some opted PSUs through GATE
- Both core and non-core companies make job offers
- Most students from Chemistry backgrounds remain unplaced
- Top recruiters included ACCENTURE, Analog Devices, Apple, CITI Bank, Google, Hindustan Unilever, HONEYWELL, IBM, ISRO
Placements for M.Tech Material Science Engineering at IIT Bombay are pretty good and a number of opportunities are available
Which is better - doing M.Tech from IITs or going for NITIE Mumbai?
Having to know some people studying in both these colleges, I can say that they are equally good. You can opt for any one of them, their respective programs are also good. They are recognized as Centres of Excellence by MHRD, Govt of India.
The choice mainly depends on the individual and their preferences. You should go for the one you are enthusiastic about.
- NITIE offers 3 courses, where the selection is through GATE scores.
- These include Post Graduate Diploma in Industrial Engineering, Project Management, and Manufacturing Management.
- These courses are a mixture of technical and business management.
- IITs offer M.Tech through GATE exam scores.
- It involves core specialization and nothing about industrial management.
So, the selection of the college and the course entirely depends on you. Go through them and then decide which will be a better option for your career.
What score and rank is required in GATE to get into DTU for M.tech being a general candidate?
DTU is a well-reputed university and its cutoff itself proves its worth and credibility. DTU, GATE Cutoff 2022 for General Category is listed below.
|
Courses |
Cutoff by Marks |
|
Software Engineering |
293 |
|
Industrial Biotechnology |
302 |
|
Environmental Engineering |
323 |
|
Information System |
332 |
|
Polymer Technology |
338 |
|
VLSI Design |
350 |
|
Digital System |
350 |
|
Microwave and Optical Communication |
350 |
|
Thermal Engineering |
351 |
|
Structural Engineering |
352 |
|
Artificial Intelligence |
354 |
The overall cutoff for GATE is 293 - 618 marks.
Which one is better for an M.Tech in CSE, DIAT, Pune or newer NITs like NIT Durgapur, Goa, Puducherry, and Meghalaya?
I have a friend who recently graduated in CSE from DIAT. According to her, DIAT fails to offer good opportunities to the students. It’s better to choose newer NITS.
- Even though DIAT comes under the Ministry of Defense, the academics and facilities offered at the institute are not up to the mark.
- The teachings, non-teaching as well as administrative people are not cooperative with the students.
- Moreover, the placement cell doesn’t bring companies for placement as expected. They don’t even bring software companies like TCS or Infosys for placement.
So from this, you can draw an overview of how things are at DIAT. You can go for NIT Durgapur or NIT Goa. Even if you don’t get NITs, try for Government College of Engineering, Pune. It has better facilities and placements.
What are the placement statistics of M.Tech. CSE in NIT, Warangal?
You will be glad to know that during NIT Warangal MTech placements 2023, the highest number of students were placed from the CSE and CSI.
Here are the placements statistics of the same
|
Placement Percentage |
100% |
|
Highest CTC |
INR 51.03 LPA |
|
Average CTC |
INR 30.43 LPA |
|
Median CTC |
INR 33 LPA |
|
Lowest CTC |
INR 14.5 LPA |
The highest salary bagged by NIT Warangal MTech students was from the CS&E department followed by the CS & Information Security branch.
Is a M.Tech in structural engineering at the NIT Trichy worth doing?
Yes, pursuing an M.Tech in Structural Engineering from the NIT Trichy can be worth doing for several reasons, including:
- Reputation and Accreditation: NIT Trichy is one of the most reputed engineering colleges in India, and its M.Tech program in Structural Engineering is accredited by the National Board of Accreditation (NBA), which is a testimony to the quality of education and training offered by the institute.
- Faculty and Curriculum: The institute has a team of experienced and qualified faculty members who are experts in the field of structural engineering. The curriculum is designed to provide a comprehensive understanding of advanced concepts and techniques in the field and to equip students with the practical skills and knowledge required to solve real-world structural engineering problems.
- Research and Industry Exposure: NIT Trichy has a strong research culture, and students are encouraged to participate in research projects and industry collaborations. This provides students with valuable exposure to the latest developments and trends in the field of structural engineering and helps them stay abreast of the latest technological advancements.
- Placement Opportunities: NIT Trichy has an excellent placement record, with several leading companies and organizations visiting the campus each year to recruit students. Graduates of the M.Tech program in Structural Engineering are in high demand in various industries, including construction, infrastructure, and consulting.
In summary, pursuing an M.Tech in Structural Engineering from NIT Trichy can provide you with an excellent education and training, exposure to the latest research and industry trends, and good career prospects in the field of structural engineering.
SUBSCRIBE TO OUR NEWS LETTER
