MTech in Product Design & Manufacturing is a 2 years post-graduate course. It introduces students to all aspects of production. Product Design and Manufacturing is the practice design of engineering systems through the application of basic knowledge and skills in mechanical engineering.
See Also: MTech/ME Courses
The program focuses on Product Design and Development, Product Life Cycle Management, Product Data Management, Robust Design, System Simulation and Modeling, Optimization Techniques, Product Planning and Marketing, Design for manufacture etc.
Admission to MTech Mechanical courses is mainly on the basis of Entrance Examinations. Few Colleges also take students on the basis of Merit marks scored in the previous higher education.
See Also: MTech/ME Colleges in India
MTech Product Design and Manufacturing : Course Highlights
| Course level | Postgraduate |
| Duration | 2 years, full-time |
| Stream | Science. |
| Examination Type | Semester System |
| Eligibility | Graduation degree with science subjects with at least 60% marks in aggregate. |
| Admission Process | Based on counselling sessions after clearing the Entrance test (GATE) or direct admission in some cases. |
| Course Fee | INR 2 to 8 lacs. |
| Average Salary | INR 2 to 10 lacs. |
| Top recruiting companies | Sony, TATA Steel, IBM Ltd. etc. |
| Job Positions | Production Engineer, Maintenance Engineer, Manufacturing Engineer etc. |
MTech Product Design and Manufacturing: Eligibility Criteria
The eligibility criteria for MTech Product Design and Manufacturing aspirants is not complicated and is as follows. It must be noted that the eligibility criteria will differ from various institutes.
- Candidates must have cleared their graduation with Product Design and Manufacturing / Automobile Engineering/ Production Engineering/ Metallurgical Engineering.
- The qualifying aggregate score required at Intermediate level is at least 50% and above.
- Candidates having a Diploma in the related field from a recognized university are eligible to apply for Lateral Entry admissions in various institutes.
- 5% moderation for the reserved category like SC/ST/OBC students.
MTech Product Design and Manufacturing: Admission Process
MTech Product Design and Manufacturing admissions are done through entrance examination mode or direct admission through quota.
Merit based Admission
- Candidates who are willing to get admission in this stream can apply to MTech Product Design and Manufacturing colleges by both offline and online means.
- You can either reach the official website of the institute or to this step admission office of the institute to fill the admission application form.
- Fill the application form required and upload all the necessary documents which are asked in the form.
- After completion of the process of application, go for counselling round and attend the personal interview round to get your desired college.
Entrance Based Admission
GATE is conducted for admission in the Master's programs of top colleges in India. Private institutes also conduct their own examinations or rely on the national/ state level entrance examinations.
What are the Top MTech Product Design and Manufacturing: Entrance Examinations
There are various national and state-level entrance exams to appear for admission into the MTech Product Design and Manufacturing program.
| Exam Name | Exam Dates |
|---|---|
| GATE | Check Here |
| SRMJEE | Check Here |
| WBJEE | Check Here |
| AP PGECET | Check Here |
| TS PGECET | Check Here |
MTech Product Design and Manufacturing: Entrance Exam Preparation Tips
- Divide your schedule: Studying without a deadline isn’t something that candidates can afford, therefore they must assign their days to certain topics and finish them within the deadline.
- Keep your resources limited: It is a must for candidates to remain focused and having too many resources will only alleviate the stress. Therefore, they must research well and shortlist some resources for the study plan and stick to it. Remember, Candidates can’t cover everything from everywhere, therefore keep it simple and accurate. They can Check GATE Important Books
- Revision is the Key: Candidates should not keep revision for the last minute. They should keep revision sessions for regular intervals. They should make some crisp notes for the last minute reading and avoid unnecessary panic before the exam.
Why should you do MTech Product Design and Manufacturing?
The goal of obtaining a MTech Product Design and Manufacturing degree depends on the aspirations and goals of each individual. Here are some reasons to follow this course:
- Reputed Positions : The course teaches about the application of scientific principles in the production of various products. Some of the job titles that are ideal for MTech Product Design and Manufacturing graduates are Manufacturing Engineer, Production Engineer, Maintenance Engineer etc.
- High Pay : The average packages for MTech Product Design and Manufacturing graduates are higher for both private and public organizations.
- Career Prospects : Engineers with this degree are suitable for many industries related to supply from manufacturing to planning, software consulting, chain management. Most of the work in this case is supervisory or managerial where critical decision-making skills are repeatedly tested for the smooth performance of the industry.
- Upon completion of this program, students will be able to receive handsome salary packages between INR 6,00,000 and INR 7,80,000 depending on the candidate's skills in the field.
- Major employment includes colleges and universities, home appliances and VLSI design units, defense services, Indian Railways, telecommunications units, automobile sector, aviation industry and power industry.
- Candidates who are interested in pursuing higher studies in the discipline can do a PhD in this subject. They may also choose to pursue a dual degree in the course or pursue research.
MTech Product Design and Manufacturing: Course Advantages
Information and details about the MTech Product Design and Manufacturing course are as follows.
- Product Design and Manufacturing is the practice design of engineering systems through the application of basic knowledge and skills in mechanical engineering.
- The course provides in-depth knowledge about manufacturing of various products including automobiles, aircraft, tractors, electronics, toys, building products etc.
- It encourages understanding of the role of management in investigation, implementation. Operation of production systems for product efficiency, cost-effectiveness and quality.
- This course is expected to be achieved through courses such as project work, internships, laboratory work, assignments, seminars and research methods and project management.
- Candidates can apply knowledge in engineering products and systems for quality, ergonomics, product life cycle management and cost of engineering products in the global market.
MTech Product Design and Manufacturing: Course Comparison
The course comparison between MTech Product Design and Manufacturing and M.E. product Design and Development is as follows:
| Parameters | MTech Product Design and Manufacturing | M.E. Product Design and Development Engineering |
|---|---|---|
| Duration | 2 Years | 2 Years |
| Focus Area | The course focuses on quantitative skills and the ability to apply models for visual design of products and processes. | Design engineering as a domain of study channelizes its focus on designing and developing various tools and equipment in a healthy and sophisticated manner. |
| Admission Criteria | State or National Level entrance examination | Entrance exam based/ Merit-based |
| Eligibility Criteria | Graduation degree with science subject with at least 60% marks in aggregate | Minimum score 60% (relaxable for reserved category students) marks at UG level. |
| Average Course Fees | INR 2,00,000 to 8,00,000 | Between INR 1,00,000 to 4,00,000 |
| Job Options | Manufacturing Engineer, Production Engineer, Maintenance Engineer etc. | Site Engineer, Design Engineer, Project Engineer, Service Engineer etc. |
| Areas of Employment | Home Appliance and VLSI Design units, Defense Services etc. | Colleges & Universities, Domestic Product Manufacturing Companies etc. |
| Average Placement Package | INR 4,00,000 to INR 5,00,000 | INR 2,96,000 to INR 3,40,000 |
| Average Starting Salary | INR 2,00,000 to INR 10,00,00 | INR 16,000 to INR 20,000 |
MTech Product Design and Manufacturing: Top Colleges
Below given is a list of top colleges offering MTech Product Design and Manufacturing along with the Average fees.
| College Name | Average Fees (INR) |
|---|---|
| MNNIT, Allahabad | INR 1,13,000 |
| NIT, Silchar | INR 91,140 |
| PEC, Pondicherry | INR 38,050 |
| RVCE, Bangalore | INR 37,700 |
| JNTUK, Kakinada | INR 30,000 |
MTech Product Design and Manufacturing: Tips to get Best College
To get admission into a good college one needs to ensure to have scored more than 90% at the Intermediate level. Apart from this, most of the institutes provide admission to the course on the basis of entrance examinations, hence preparing well for the entrance exams is a must for an aspirant to get the best college.
Note: Before shortlisting and selecting colleges finally, they must ensure to check the placement rate of the college, method of course delivery, admission system, and the financial aid offered there.
Important Links:
MTech Product Design and Manufacturing: College Comparison
Below given is a course comparison between the top colleges offering MTech Product Design and Manufacturing courses in India. This comparison is on the basis of few parameters that are tabulated below in the table:
| Parameter | MNNIT Allahabad | NIT Silchar | PEC, Pondicherry |
|---|---|---|---|
| Objective | Motilal Nehru National Institute of Technology is a deemed university, founded in 1961. This institute offers a large number of UG,PG and PhD courses. | National Institute of Technology is a deemed university of India that offers UG,PG and PhD courses through its departments and affiliated colleges. | The college of engineering, it is also a top engineering college. It is affiliated to a Pondicherry University |
| Location | Allahabad | Silchar | Pondicherry |
| NIRF Ranking 2020 | 93 | 94 | 122 |
| Average Annual Fee | INR 1,13,000 | INR 91,140 | INR 38,050 |
| Average Placement Package | INR 11,80,000 | INR 5,70,000 | INR 4,00,000 |
| Top Companies Visited | Accenture, Adobe, Myntra, Intel, Infosys, Google etc. | Amazon, SAP, Snapdeal, Ericsson, L&T, etc | TCS, Accenture, L&T, PayPal, Wipro, CTS etc. |
MTech Product Design and Manufacturing: Syllabus
The subjects taught for the MTech Product Design and Manufacturing program are almost the same in most engineering colleges. The syllabus of the complete MTech Product Design and Manufacturing course is as follows.
| SEMESTER I | SEMESTER II |
|---|---|
| Metal casting and Joining Processes | Modern manufacturing Process |
| Metal Forming | Computer aided engineer |
| Operations forming and control | Quality Engineering and Management |
| Manufacturing lab | Digital Prototyping Lab |
| SEMESTER III | SEMESTER IV |
| Dissertation Preliminaries | Dissertation |
| Seminar | ---- |
MTech Product Design and Manufacturing: Recommended Books
Below given is a list of important books that are a vital part of the MTech Product Design and Manufacturing curriculum. Students must have these books to understand the concepts of Product Design and Manufacturing with ease.
| Name of the book | Author |
|---|---|
| Product Design and Manufacturing | A C Chitale and R C Gupta |
| New Product Development – Design and Analysis | Ronald Engene Kinetovicz |
| Product Design for Manufacture and Assembly | Geoffrey Boothroyd and Peter Dewhurst |
| Product Design and Manufacture | John R Lindbeck |
| Advanced Mechanics of Materials | Richard J Schmidt. |
MTech Product Design and Manufacturing: Job Prospects
- Many can go for higher education in supply chain management, operations research, inventory management and intellectual property rights in product design and manufacturing. Most of the work in this case is supervisory or managerial where critical decision-making skills are repeatedly tested for the smooth performance of the industry.
- After getting successful completion of the course, successful candidates are employed in both private and government jobs in this industry. Candidates who are interested in pursuing higher studies in the discipline can do a PhD in this subject.
- Successful candidates who are interested in teaching can start a teaching career in universities / colleges.
A MTech Product Design and Manufacturing student can choose any general job profile including job description and salary package as mentioned in the table below.
| Job Profile | Description | Average salary in INR per year |
|---|---|---|
| Executive Manager | Achieving the goals, vision and objectives of a firm, overseeing the work of each department, financing, marketing and so on. | INR 3,00,000 to INR 4,00,000 lacs |
| Process Engineer | To evaluate processes, take measurements and interpret data, design, operate, test and upgrade systems and processes. | INR 4,00,000 to INR 5,00,000 lacs |
| Product Design and Manufacturing manager | They develop tools to assist the production process. | INR 6,00,000 to INR 7,00,000 lacs |
| Manufacturing Engineer | Applying the concepts of product design, fabrication, assembly, equipment and materials and respecting the equipment vendors and seeking supervision from the operators. | INR 6,00,000 to INR 7,00,000 lacs |
What are the Future Scopes of MTech Product Design and Manufacturing ?
Apart from seeking jobs, yet another option available to students is to pursue higher education. Students can go for below mentioned higher education options :
-
PhD: If a student wants to continue in the same field of education, the first program of choice is a PhD Product Design and Manufacturing . It is a three to five year duration course and the eligibility criteria include having a MTech Degree in related disciplines.
See Also Top PhD Colleges in India
-
MBA: A large number of engineering postgraduates prefer to go in the management field by choosing to pursue a PGDM or MBA course. Admissions are offered to this course based on the national level entrance test.
See Also Top MBA Colleges in India
MTech Product Design and Manufacturing: FAQs
Ques : Are there any entrance exams for admission in MTech Product Design and Manufacturing course?
Ans : There are two types of entrance examination for MTech Product Design and Manufacturing. The examinations are one is state-level and another is national-level. Most of the institutes are accept the national level exam i.e. GATE.
Ques : How does the MTech course explore with companies and markets?
Ans : This course also explores the full benefits that can be achieved through the need to match production techniques with advanced manufacturing technologies and products, companies and markets.
Ques: How is the course suitable for the MTech Product Design and Manufacturing course?
Ans: The course is suitable for those students who have good knowledge in Mathematics and Science. The course is engaged in providing students research, consultancy, testing and characterization majorly in the areas of advanced materials development, processing and design.
Ques: How will this course help students specialize in being an MTech Product Design and Manufacturing?
Ans: This course will help students to specialize the knowledge in engineering products and systems for quality, ergonomics, product life cycle management and cost. The post graduates will be able to design the products, perform simulation and analysis for automobiles etc.
Ques: What is the average fee for MTech Design and Manufacturing program in Indian colleges / universities?
Ans: The average fee is different for public colleges and private colleges. The average fee for public colleges ranges from INR 10,000 to INR 1,10,000. The average fee for private colleges ranges from INR 60,000 to INR 2,20,000. The course depends on the colleges / universities seeking admission in any one of them.
Ques: What should students choose after completing a postgraduate degree in MTech Product Design and Manufacturing?
Ans: After completing the MTech Product Design and Manufacturing course, the students pursue a career as a manufacturing engineer, production engineer, maintenance engineer, etc. Students can also be lecturers and professors in colleges / universities are also suitable for this.
Ques: What is the overview of the MTech Product Design and manufacturing program?
Ans: This course presents an overview of the product design and development process, including production aspects. Production and assembly concepts design, analytical tools for development, costs that help students learn to design, design and manufacture quality products at competitive prices.
Ques: Can one choose the names of the top companies to run internships in India?
Ans: After completing the MTech Product Design and Manufacturing course the students can join the company for internship. The colleges are L&T, TCS,HP,LG, Sony, Reliance Industries Ltd., Maruti Udyog etc. The major employment areas are Telecommunication units, Automobile Sector, Defense Services, Aviation Industry and Power Industry including colleges and universities.
Ques: How is MTech Product Design and Manufacturing courses useful?
Ans: The course is useful for developing flexible system approaches for nonprofit development processes. This course systems to meet the change in technical, management, economic and social standards.
![IIT Kanpur - Indian Institute of Technology - [IITK]](https://images.collegedunia.com/public/college_data/images/appImage/25948_IITK_New.jpg?tr=h-150,w-320,c-force)
![IIT Kanpur - Indian Institute of Technology - [IITK]](https://images.collegedunia.com/public/college_data/images/logos/1408554560logo.png?tr=h-30,w-30,c-force)
![Visvesvaraya Technological University - [VTU]](https://images.collegedunia.com/public/college_data/images/appImage/25633_VTU_NEW.jpg?tr=h-150,w-320,c-force)
![Visvesvaraya Technological University - [VTU]](https://images.collegedunia.com/public/college_data/images/logos/1503981917vturesultsfacebook.jpg?tr=h-30,w-30,c-force)
![MNNIT Allahabad - Motilal Nehru National Institute of Technology - [MNNIT]](https://images.collegedunia.com/public/college_data/images/appImage/1503636333cover.jpg?tr=h-150,w-320,c-force)
![MNNIT Allahabad - Motilal Nehru National Institute of Technology - [MNNIT]](https://images.collegedunia.com/public/college_data/images/logos/1503636333logoMNNIT.jpg?tr=h-30,w-30,c-force)
![R V College of Engineering - [RVCE]](https://images.collegedunia.com/public/college_data/images/appImage/1601467085Cover.jpg?tr=h-150,w-320,c-force)
![R V College of Engineering - [RVCE]](https://images.collegedunia.com/public/college_data/images/logos/1717317879logonew.png?tr=h-30,w-30,c-force)
![Barkatullah University - [BU]](https://images.collegedunia.com/public/college_data/images/appImage/25660_BU.jpg?tr=h-150,w-320,c-force)
![Barkatullah University - [BU]](https://images.collegedunia.com/public/college_data/images/logos/1434430370banasr.jpg?tr=h-30,w-30,c-force)
Comments