Questions Asked On BVM, Vallabh Vidyanagar

If you can afford it, go for it. Because it is a bustling green campus with 40 odd colleges, you will have an unforgettable experience. Placements used to be nice, but they’ve taken a hit recently; however, they’re still good if you’re good at studies (scoring 6.5 CGPA).

LD is also a good college, but it’s not better than BVM, aside from the affordable fees and the fact that it’s in Ahmedabad.

You should also know that LD College and BVM are Engineering colleges. Whereas, Sardar Patel University V.V. Nagar provides B.Sc., M.Sc., and other non-engineering courses.

Now, here’s a comparison of BVM and LD that will give you get a better picture.

• In terms of education, BVM is superior to LD. The faculty at BVM is the most experienced and knowledgeable. LD, on the other hand, is not well-known for its educational offerings. Lectures are not given on time, and attendance is never an issue in LD.
• In terms of placement, more companies visit LD than BVM, but if you are good enough and have good grades and aptitude, you will be placed at either college. According to the recent placement highlights the average CTC offered at LD College of Engineering is 4 LPA. 
• The LD campus is much larger than the BVM campus, but both colleges’ infrastructure is very old, whereas the BVM campus has all necessary student facilities.
• If you want to live in a city and experience city life, choose LD; if you want to live in a peaceful environment with all necessary infrastructure, choose BVM.

Overall, I would recommend BVM. 

One of my cousins is a student at IIIT Vadodara. I hope I will be able to help you with this doubt.

BVM is an old college whereas IIIT Vadodara is very new to its comparison. What my cousin says is, if he had a choice between BVM and IIIT Vadodara, he would have definitely chosen BVM over IIIT Vadodara.

IIIT Vadodara provides you with very few resources. There is no permanent campus and it lacks hostel facilities. It would not be surprising to see that it still lacks these two basic infrastructures even after ten years from now.

• The college runs in a local college in Gandhinagar.
• The hostel fee depends on the owner, you will have to pay whatever he asks. In addition to that, since the hostels are not so near the college, you will have to pay for transportation fees as well. This is really frustrating as the college makes us pay for its inadequacy.
• No proper laboratory facilities for subjects such as Physics, BER, IR.

My cousin, who is in his fourth year of graduation, regrets joining IIIT Vadodara. Although the tag of an IIITian may help you in getting a better placement than BVM.

If you are getting an opportunity to opt for BVM, go for it. It is a well-established college and you will get ample resources to utilize for your growth.

Birla Vishvakarma Mahavidyalaya Engineering College (BVM) is located in Gujrat and is a grant-aided engineering college. The institute is affiliated with the Gujarat Technological Institute and provides a BE course for Mechanical Engineering.

Dharmsinh Desai University (DDIT) is located in Nadiad, Gujrat, and is one of the most prospering universities in Gujarat which has been ranked in the band of 101-150 best universities in India by the NIRF ranking frameworks. It offers a BTech in Mechanical Engineering.

Pandit Deendayal Petroleum University (PDPU) is located in Gandhinagar, Gujarat. The university is a member of AIU and is NAAC accredited with an ‘A’ grade. It offers a BTech program for Mechanical.

BVM:

Academics:

• Admission to Mechanical engineering at BVM is on the basis of rank secured by students in the Gujarat Common Entrance Test. Students who have a valid JEE Main score can also apply.

• The required cutoff for Mechanical at the institute are 1775 (JEE Main) and 2464 (GUJCET).

• The course fee is 1.31 lakhs per annum.

Placements:

It is one of the most popular courses at BVM with maximum students pursuing a career at a company within Gujarat.

• Over 35 companies visit the campus placement with big names like TCS, L&T, Infosys, etc.

• The highest CTC offered at the institute is 12 lakhs.

DDIT:
Academics:
 

• DDIT students are required to take GUJCET or JEE Main in order to seek admission.

• The course fee is 1.52 lakhs for 1st year.

Placements:

• The average package at the institute is around 4.5 lakhs.

• Some of the major recruiters visiting the campus include Amazon, Honeywell, Zeus Learning, etc.

PDPU:

Academics:

• Students seeking admission to the BTech Mechanical course should have a valid JEE Mains score. The required cutoff is around 2861.

• The course fee is 2.53 lakhs for 1st year.

Placements:

• PDPU is also famous for its placement with over 80% of students getting placed in top companies in the field.

• Some notable employers include Honeywell, UOP, L&T Technology Services, Torrent Power, Jubilant Life sciences, Byju’s, Torrent Gas, ExxonMobil, Welspun, etc.

• The average CTC offered at the institute is 6.75 LPA, whereas the highest CTC goes up to 16.6 LPA.

Thus, it completely depends on the students which college they should choose for their B.tech in Mechanical Engineering.

Both the institutes offer decent Mechanical Engineering programs with good placements. Pandit Deendayal Petroleum University (PDPU) is famous for its petroleum engineering courses as the name suggests. Birla Vishvakarma Mahavidyalaya Engineering College (BVM) is a grant-aided autonomous college and offers mechanical engineering courses among other B.Tech degrees.

Given below are a few factors that you need to consider while comparing these two institutes for Mechanical Engineering.

Admission & Eligibility:

• Admission in Mechanical Engineering at PDPU is through JEE Main. The student must have passed in 10+2 exams with Maths & Science.

• Admission to BVM is through GUJCET. The student must have passed 12th with a minimum of 45% marks with maths & science.

Fee Structure:

• The first-year fee for PDPU is INR 2.53 lakhs. The total fee for 4 years will come to around INR 9.37 lakhs (not including hostel fees).
• The first-year fee for BVM is INR 1.31 lakhs. The total fee for 4 years will come to around INR 5.24 lakhs, which is around half the fee of PDPU. Hostel fees are extra.

Infrastructure:

• Apart from having all the necessary machines in the Mechanical lab, BVM also has a functional boiler that students can learn from.

• The labs in PDPU are new and equipped with advanced instruments and machines.

Placement:

PDPU:

The placement opportunities for mechanical engineers in PDPU are not as high as those for BVM.

• Still, PDPU students get campus placement opportunities from Mahindra & Mahindra, Tata Power, MG Motors, Nyara Energy, Adani Power, Worley, etc.

• The annual CTC offered during campus placements for mechanical students was INR 6.75 LPA. The average CTC for Mechanical is lower compared to other core branches like compared to electrical & civil engineering (10 LPA).

BVM:

• BVM engineering students get campus placements from over 30+ MNCs. Around 70% of mechanical engineering students got placed.

• Some of the recruiters for mechanical engineers are L&T Power, TCS, HFFC, Alpha9 Marin, Shriram Transports, Electrotherm, Reliance, etc.

• The average annual CTC offered is around INR 5 LPA. The highest salary package received by a student was INR 25 LPA.

There is no outright factor to determine a winner between these colleges. Feel free to make a decision based on your interests. There is no wrong decision when it comes to studying mechanical engineering in either of these colleges.

LD College of Engineering is one of Gujarat’s best premier colleges with the objectives of imparting higher education where the students can explore themselves in engineering. 

Birla Vishvakarma Mahavidyalaya ranks 9th in Gujarat among the top engineering colleges by NIRF 2020. At present, the institute consists of 132 faculty members. 

Sardar Patel University is the 5th oldest premier institute and ranked 114 by NIRF 2019. It is one of the best engineering institutes in Maharashtra, where the college alumni work in top IT firms. 

Admission process:-

LD college of Engineering

• The BTech course admission requires a minimum of 50% marks in 10+2 with physics, chemistry, and maths. 
• The selection is based on the score in GUJCET. 
• The cutoff range is 50-9294.
• The course fee is INR 9520.

Birla Vishvakarma

• The candidates must have a 10+2 in science stream with a minimum of 45% marks. 
• GUJCET qualified candidates are eligible for admission in BTech.
• The total fees required is INR 1.31 LPA. 
• The cutoff range is 409-9162.

SPCE

• Admission to BTech/B.E is offered to the students who have pursued 10+2 with a minimum of 50% marks. 
• Applications are made through MHT CET, and admissions are offered based on merit. 
• The total fees required is INR 1.70 LPA. 
• The cutoff required is 135-149.

Placements:-

• LD college of Engineering always encourages and motivates the students for innovative ideas. The total number of companies visited in 2019 is 112.
• Birla Vishvakarma is known for having the best placement record having more than 35+ companies visiting the campus every year. 
• More than 95% of the students from SPCE got placement in 2019. The average salary offered in 2019 was 5% more than the previous year.

The top recruiters are Deloitte, Byjus, Adobe, Oracle, Directi, Mahindra, PwC, Bosch Limited, Wipro, Tata Communications, Amazon, IBM, Infosys, Oracle, Deloitte, Voltas, Philips, TCS, Accenture, etc. 

Birla Vishvakarma Mahavidyalaya is much more preferred than the other two colleges. The experienced faculties, good placements, and wide campus make it a suitable place for the students.