Considering the recent placement statistics, Metallurgical Engineering is the best stream to opt for in BIT Sindri.
Dividing the total number of students placed by the total number of students in the final year of a batch, the placement ratio for Metallurgical Engineering is maximum. This makes it the most successful branch in terms of placement in BIT Sindri.
The table below gives a brief overview of the Metallurgical Branch in BIT Sindri.
Total Fees (B.Tech in Metallurgical Engineering) |
Rs.1.17 Lakhs |
Median Salary offered |
Rs.5 Lakhs per annum |
Highest Salary offered |
Rs.10.12 Lakhs per annum |
Total number of seats |
54 |
Placement percentage (on-campus) |
80% (approx) |
Key Highlights:
So, being honest to one’s own self is the best objective while choosing streams, with interest in the chosen one.
The average and highest package for every department varies from year to year in BIT Sindri. But, there are similarities in the figures every year, and the average package is found to be somewhat close to 3.5 to 4 Lakhs per annum for Computer Science.
There are some companies, like Mu Sigma who offer 8 Lakhs per annum or even more, which can be considered as the highest package in recent years.
The table below gives the placement statistics for the past few years for Computer Science in BIT Sindri.
Session |
Highest Package offered |
Lowest Package offered |
Average Package offered |
2018-19 |
Rs.7 LPA |
Rs.3.3 LPA |
Rs.3.62 LPA |
2017-18 |
Rs.7.2 LPA |
Rs.3.36 LPA |
Rs.3.5 LPA |
2016-17 |
Rs.6 LPA |
Rs.3 LPA |
Rs.3.3 LPA |
2015-16 |
Rs.21 LPA (for 3 years) |
Rs.3.6 LPA |
Rs.3.6 LPA |
Therefore, most companies recruiting in Computer Science offered around 3.5 to 4 LPA, except few companies, who offer more than 7 LPA in BIT Sindri. Having an average of about 70-75% placement in CSE, BIT Sindri provides a decent average graded placement.
BIT Sindri is far better than IEM in every aspect be it in campus, faculty, or placement, etc. Discussed below are a few of the reasons why.
Placements: (Winning Institution - BIT Sindri)
Type of Institution:
BIT Sindri is a Govt. institution and ought to be better than IEM which is private.
Both IEM and BIT have their own reputation. Here is given the table differentiating both the institutes.
Category |
IEM |
BIT Sindri |
Average Package |
INR 6 LPA |
INR 4.51 LPA |
Highest Package |
INR 15.5 Lakhs |
INR 10.12 LPA |
Recruiters |
Amazon, TCS, Adzooba, Capgemini, Infosys |
TCS, TATA Steel, TATA Hitachi, Minex, Vedanta |
Fees |
INR 5.81 LPA |
INR 1.17 LPA |
In terms of education, Birsa Institute of Technology or BIT Sindri is a good option. It also gives students a friendly environment for study and great exposure. So if you are looking for enrolling in BIT Sindri, then go ahead with it.
BIT Sindri is very good in many ways be it infrastructure, campus life, hostels, or education. Few colleges have separate departmental buildings but BIT has a separate building for all its branches.
The reasons to choose BIT Sindri are as follows:
So, if you are planning to join BIT Sindri, you must. Apart from good training, it also offers a good learning environment. All facilities and infrastructure of BIT Sindri are in good condition. So you won't regret joining.
Mechanical is better at BIT Sindri. It is the best department in the institute with an impressive placement record. BIT Sindri placements 2021 had witnessed the highest CTC of INR 10.54 LPA. The recruiters' list includes core as well as IT companies. Mechanical students of BIT Sindri score well in competitive examinations such as GATE as well.
BIT Sindri mechanical is way better than that of many NITs and maybe some less popular IITs. Though the lab is very old still its machinery is in good condition.
Facilities-
BIT Sindri offers great facilities and types of machinery such as a wind tunnel, and other automobiles.
Birsa Institute of Technology or BIT Sindri is the best college to study Mechanical Engineering.
Category |
BIT Sindri |
Fees |
INR 1.17 Lakhs |
Highest Package |
INR 10.12 LPA |
Average Package |
INR 4.51 LPA |
Recruiters |
TCS, TATA Steel, TATA Hitachi, Minex, Vedanta, L&T, JSL, Wipro, etc. |
Thus, if you are looking to study Mechanical Engineering then BIT Sindri would be a good option. Along with good infrastructure, it also has skilled faculty and good placement. So, you can join it without any doubt.
Yes, you can take IT in BIT Sindri easily with a common merit rank in JCECE. In usual circumstances, a candidate can even get Chemical Engineering in the second round of counseling.
The table below shows the cut-off ranks in JCECE for BIT, Sindri for different categories -
Department |
General cut-off rank |
OBC I cut-off rank |
OBC II cut-off rank |
SC cut-off rank |
ST cut-off rank |
IT |
660 |
767 |
785 |
3926 |
6440 |
A score of 90+ is considered to be enough to get a good branch in BIT Sindri, for general category students.
Life at BIT Sindri is considered to be of an average standard, being an engineering college. There are several shortcomings about being in BIT Sindri which turns out to be a disadvantage during the course.
The following points state a few facts about life and placements at BIT Sindri, which are the opinions of almost every student.
Placements
To crack competitive exams like GATE, CAT, GRE, etc, students in BIT Sindri have to work hard and experience tough college life.
There are students who consider their life at BIT Sindri to be as glorious as expected, with several memories and campus stories. The government is taking a lot of initiatives to regain the glory of BIT Sindri, which is a positive aspect at present.
According to recent data, BIT Sindri’s production, metallurgy, and chemical engineering departments have good scope for placement in core companies.
The points listed below state the general aspects and facilities provided by the departments in BIT Sindri.
Departments/Subjects |
Top Recruiters |
Metallurgy |
Vedanta, TATA Steel, Usha Martin, Electrosteel, Bhushan Power, etc. |
Production |
Tata Telcon, Daimler, Tata TRF, etc. |
Chemical |
PSUs like ONGC, GAIL, IOCL, etc. |
For Metallurgy undergraduates, the opportunities are listed below.
For the Production undergraduates, the opportunities are as follows.
For the Chemical undergraduates, the opportunities are listed below.
To summarize, the above three branches provide a decent amount of opportunities in both private and government sectors. It is always the choice of the student to excel in his/her skills, their preparations and hardships they go through the four years of engineering, making a difference in career and further opportunities.
First of all, it is one of the most sought out branches here in BIT Sindri, so definitely if you are studying CSE and the world of coding fascinates you then go for it. Without a doubt, I can say that if you are good at coding and you are really passionate about it then the college doesn't matter much because there are many good online courses and competitions available to prove your skills.
Categories |
CSE at BIT Sindri |
Course Fee |
1.17 lakh |
Placement Percentage |
80-90% |
Highest CTC |
12 LPA |
Average CTC |
4-5 LPA |
Recruiting Companies |
TCS, IBM, Deloitte, Amazon, Tata Steel, Vedanta, etc. |
In terms of placements, you will be placed, but not in the companies you desire. Metallurgical engineering clearly outperforms the competition. To be honest, production and chemicals are not great, but it also depends on the person, as I have seen my seniors from these branches get placements in Vedanta and Tata with good salary packages.